Ring Sizing Chart
Determine Ring Size With a Ring Size Chart
Ring Chart One (Download PDF)
In order to print the ring sizer, be sure that your printer is set to 100%. Make sure that you have not reduced the print size in your printer 'page setup' area. You can verify that the sizer printed correctly by measuring it with a ruler; it should measure from A to B: 3 1/2 inches long. Once you have printed the sizer, follow these directions to find your ring size: 1. Cut out the ring sizer 2. Cut a slit for Slot "A" 3. With the numbers facing out, wrap the sizer around the finger where the ring will be worn. 4. Pull the pointed end Tab "B" through Slot "A" until the sizer is snug, making sure to allow size for the knuckle. 5. The number aligned with Slot "B" is your ring size. 6. If the measure lands between two numbers your size is a half size Ex: Between 5 and 6 ring size: 5.5. If half sizes are not available, order the next largest size.
Ring Chart Two (Download PDF)
You can use this chart to compare sizes to an existing ring. Use a ring that fits you to determine your ring size. Place your ring over the nearest size circle. The inner edge of the ring should align with the outer edge of the circle. If your ring appears to fit between two sizes, buy the larger size.